Hi-Ten Strand

Key Features

• The DSI Underground HI-TEN Strand Bolt is a cable designed to be installed as a long rock bolt which is capable of being post-tensioned at the face, or out-bye, to loads of up to 25 tonne using the DSI Underground Tensioner Unit.
• The HI-TEN Strand Bolt is manufactured from 21 wire strand having a 12mm square, for mixing chemical anchors, welded to one end of the strand.
• The HI-TEN Strand Bolt has a special collar and segmented wedge, which can sustain collar loads of between 52 and 55 tonne.
• The HI-TEN Strand Bolt is designed for high pre-tensioning using a point anchor system. Full encapsulation up to 8.0m is obtainable depending on installation equipment available.
• If full encapsulation is required, extra slow speed resin anchors of 20 minutes set time are available.
• The HI-TEN Strand Bolt can also be effectively used with cementitious grouts.
• The HI-TEN Strand Bolt concept allows a longer than seam height bolt to be installed at up to 30° from the vertical at the face, or out-bye, to supplement existing strata reinforcement. Compatible domed plates are available to be used with the HI-TEN Strand Bolt.