Fiberglass Dowel

Key Features

• The 20mm dowels are pull formed (matched die) fibreglass construction and are ribbed over their full length to provide maximum load transfer.
• Thread form is of a sinusoidal type, nominally 150mm long and 25mm diameter, and is fitted with an integral drive nut with radial face.
• All 20mm fibreglass dowels are designed to be used with resin anchors and be fully encapsulated.
• Only the 20 and 30 tonne capacity fibre glass dowels should be used with cementitious grouts.
• Bolts over 2400mm in length are available in all dowel types by negotiation.
• Australian Patent Numbers 631881 and 65494 are applicable to these bolts.